|
|
HygroClip IW
for wall mount (area monitoring), wire mesh filter
-40...85ºC (-40...185ºF)
length: 145mm (5.7"), d: 15mm (0.6") |
 |
|
HygroClip IC-1 (100mm) / IC-3 (250mm)
for through wall installation, PPS body, wire mesh filter
-50...200ºC (-58...392ºF)
body: length: 100/250mm (3.9/9.8"), d: 15mm (0.6")
cable: 2m (6.5ft) |
 |
|
HygroClip IM-1 (120mm) / IM-3 (270mm)
recommended for high humidity, high temperature applications
for through wall installation, stainless steel body, wire mesh filter
-50...200ºC (-50 ...392ºF)
body: length: 120/270mm (4.7/10.6"), d: 15mm (0.6")
cable: 2m (6.5ft) |
 |
|
HygroClip IE-1 (G1/2 ") / IE-3 (NPT1/2 ")
for pressurized applications max. 50 bar (725 PSI)
sintered stainless steel filter
applications at ambient temperature, survives -50...85ºC (-58...185ºF)
cable: 2m (6.5ft) |
 |
|
HygroClip IC-05 miniature probe
for measurement in tight spaces
max. 100ºC (212ºF)
diameter: 5mm (0.2"), cable: 2m (6.5ft) |
 |
|
AC1616 Probe Extension Cable
integrated signal booster
2 to 200m in 10 m increments or 6ft to 656ft in 1 ft increments |
 |
|
HygroClip ID-EX intrinsically safe (approval pending)
through-wall installation
probe body length: 250mm (10"), d: 15mm (0.6")
sintered stainless steel filter
survives up to 200ºC (392ºF) at sensor |
 |
|
HygroClip IW-EX intrinsically safe (approval pending)
for wall mount (area monitoring)
housing 140 x 85 x 80mm (5.5 x 3.3 x 3.1")
probe 150 x 15mm (5.9 x 0.6")
sintered stainless steel filter
max. 40ºC (104ºF) |
 |
|
ZB1 Zener Barrier
for HygroClip ID-EX and IW-EX |
 |
|
AC1617 Connecting Cable for ZB1
2 to 100m in increments of 10m or 6ft to 326ft in 1 ft increments |
