A Gravity Feed Sampler is a simple cost-effective sampling method for multiplexed on-stream analysis. The samplers can be rubber lined or flanged and are available in a wide variety of pipe diameters to suit your particular application.
Product Detail
The correct presentation of sampled slurry to both dedicated and multiplexed mineral slurry analysers is fundamental to the success of any on-line analysis system. A Gravity Feed Sampler is a simple cost-effective sampling method for multiplexed on-stream analysis. A Gravity Feed Sampler is normally installed on a near horizontal slurry pipe or launder which is carrying the full slurry stream. The outlet from the sampler flows under gravity to either the analyser or to a pump which then pumps it to the analyser.
Simple cost-effective sampling for multiplexed on-stream analysis. Rubber lined and flanged to suit application. Replaceable sample cutters. Available in pipe diameters from 100mm (4 inch) to 900mm (36 inch). Best suited to lower slurry flow rates, <250m³/hr and pipe diameters of <300mm (12 inch).
|
