A Pressure Pipe Sampler is a simple, cost-effective sampling method for multiplexed on-stream analysis. A Pressure Pipe Sampler is normally installed in a vertical section of pipe, which is carrying the full slurry stream. It can be rubber lined or flanged and is available in a variety of pipe diameters to suit your particular application need.
Product Detail
The correct presentation of sampled slurry to both dedicated and multiplexed mineral slurry analysers is fundamental to the success of any on-line analysis system. A Pressure Pipe Sampler is a simple cost-effective sampling method for multiplexed on-stream analysis. A Pressure Pipe Sampler is normally installed in a vertical section of pipe which is carrying the full slurry stream.
Rubber lined and flanged to suit application. Replaceable polyurethane turbulence bars. Available in pipe diameters from 100mm (4 inch) to 900mm (36 inch). Best suited to lower slurry flow rates, <250m³/hr and pipe diameters of <300mm (12 inch).
|
