Industrial Drum Pumps - Standard Pump SP-700-DD Drum Pumps

Industrial Drum Pumps, Standard Pump, SP-700-DD Drum Pumps

Industrial Drum Pumps, Standard Pump, SP-700-DD Drum Pumps
Discharge Fitting

The SP-700-DD drum pumps are engineered specifically for transferring viscous materials from drums and tanks commonly found in the Industrial Market place. The progressive cavity design delivers continuous flow of material with little product degradation. Maximum viscosity is 100,000 cps (mPAS).

Common Applications:
> Polymers
> Oil & Greases
> Resins
> Paints
> Adhesives
> Varnishes

Technical Data :
Design:
Progressive Cavity /Positive Displacement
Max. Viscosity:
100,000cps (mPAS)
Dishcharge Port:
1.5” / 38mm hose barb, optional 1.25”/32mm
Stator Materialsl:
Teflon, Viton or Buna-N
Immersion Lengths:
27" (700mm)
39" (1000mm)
47" 1200mm)
Mechanical
Seal:
SiC/Viton/SiC
Wetted Materials:
Tube & Rotor Assembly: 316 Stainless Steel Stator Material: Teflon, Viton, or Buna
Motor Drives:
Pneumatic or electric motors are available in 50 & 60 Hz, 230, 380, 415 & 460v
 Consult chart for viscosity ratings and performance curves(PDF)
Fittings:
Large Type Acme Thread design enables
operator to disassemble pump quickly for
cleaning, maintenance, and inspection.
Mounting
Flange :
B14/C140-160
Maximum
Flow Rate:

17GPM / 64 LPM
Pressure:

174 psi / 12 bar
Benefits:
  • Easy Maintenance
  • Threaded Components
  • Continuous Flow
  • Low Shearing Properties
Motor Drives :
• Industrial Electric
  230/460V/3/50-60Hz
• Industrial   Pneumatic Motors

Industrial Motor Drives

Industrial Drum Pumps, Standard Pump, SP-700-DD Drum Pumps
Industrial Drum Pumps, Standard Pump, SP-700-DD Drum Pumps

Consult chart for viscosity ratings and performance curves(PDF)


Warning: When pumping flammable or combustible liquids pump tube must be
                used in conjunction with an explosion proof motor.

 

Site Design - Panther Marketing & Design
Back to Top