Data Instruments Honeywell DuraStar™ Linear Position Transducer
The DuraStar™ rodless linear position transducer incorporates over thirty years of MystR® technology into the longest lasting factory-rugged potentiometer.
 

Data Instruments Honeywell Longfellow II Linear Position Transducer
The new Longfellow II Linear Position Transducer incorporates design innovations to increase transducer life and provide greater resistance to vibration, while providing a smooth high quality signal for the most demanding factory control applications. It has a solid stainless steel shaft, longer front-end bearings, a vibration-free damped element, a spring-loaded ball joint and a high precision precious metal wiper.
 

Data Instruments Honeywell Short Longfellow Linear Position Transducer
The Short Longfellow Linear Position Transducer is frequently used for measuring linear position or displacement up to 6" on a wide variety of manufacturing and process equipment. The mechanical design of the unit's front bearing, anodized extruded aluminum housing, stainless steel shaft and precious metal wipers are suitable for a factory's harsh environment.
 

Data Instruments Honeywell Models LT/MLT Linear Position Transducers
Linear Position Transducers Models LT and MLT are small diameter linear position transducers rugged enough to withstand the hostile environment of the factory. Using a proprietary dual wiper, internal ball joint and the MystR® conductive plastic film, the MLT provides usable output at high vibration levels for long periods.
 

Data Instruments Honeywell Model WPM Rotary Position Transducer
The WPM series of rotary potentiometers are used in a variety of feedback and position indicating circuits.The MystR® film provides exceptionally long rotational and dither life without sacrificing microlinearity or resolution. The shielded ball bearings ensure long life even with side load conditions.
 

Data Instruments Honeywell Model M-22 Rotary Position Transducer
The M22 Rotary Potentiometer, available in servo and bushing mount, utilizes wear resistant MystR® conductive plastic film combined with precious metal wipers to produce a quiet operating, low noise, stable signal. The M22 Series potentiometers are used in position sensing applications which demand high reliability at low cost.
 

Data Instruments Honeywell MediaMate Pressure Transducer
The Mediamate® pressure transducer provides you with the corrosion resistance of stainless steel at low OEM pricing. It is fully compensated and completely interchangeable without further calibration. The Mediamate's wetted parts and outer case are made from 300 series stainless steel. It is now being used with a wide variety of corrosive media such as Freon®, ammonia, water and hydraulic fluids.
 

Data Instruments Honeywell Models EA & EAF Pressure Transducers
The EA is designed for OEM uses requiring high output and corrosion-resistance. It is well-suited for the cycling regimes found in automatic equipment, robots and hydraulic systems. Its pressure port, amplifier and voltage supply regulator are packaged in a Valox case. The EAF outputs a low frequency digital signal which is ideal for electrically noisy environments as well as applications requiring long distance signal transmission or an interface to a microprocessor. The output signal is a frequency modulated square wave set from 1 to 6 kHz.
 

Data Instruments Honeywell Model SA Harsh Duty Pressure Transducer
The harsh duty SA pressure transducer has a water resistant, stainless steel case for complete protection from harsh environments. Internal hermetic sealing is used to provide measurement of absolute pressures (PSIA) or pressures referenced to a sealed chamber (PSIS). The SA produces a high level voltage output of 1-6V output from an unregulated supply.
 

Data Instruments Honeywell XPRO Low Cost Pressure Transmitter
The XPRO pressure transmitter provides both the instrument engineer and OEM designer with a reliable and affordable measurement. The 4-20 mA output signal is particularly suited for long cable runs in electrically noisy environments. The XPRO is recognized by Underwriters Laboratories as an intrinsically safe device for use in hazardous locations.
 

Data Instruments Honeywell Models EA-BD & SA-BD Bidirectional Pressure Transducers
The EA-BD and SA-BD Pressure Transducers sense pressure above and below atmospheric pressure without using a vacuum reference chamber. The transducers give a 1 VDC output at a set negative pressure. Their output signal is 1-6 VDC. EA-BD's are gauge models and SA-BD's are sealed. They find wide use in applications where pressures can go from below atmospheric to considerably above - such as in medical respirators or refrigeration.
 

Data Instruments Honeywell Model BL Pressure Transmitter
The BL pressure transmitter has a conventional 4-20 mA output and is available with accuracy's to 0.25%. It has Factory Mutual approval as an intrinsically safe device for use in hazardous areas Class I, Division I, Groups A through G. All PSIS or PSIA BL's are hermetically sealed. The pressure sensitive diaphragm is either 316L or 15-5PH stainless steel, depending on the pressure range selected.